Exposure Lights Flex eMTB Light

EXPOSURE FLEX E-MTB LIGHT

OPERATION

Double press to turn light on.

Single press to toggle between modes.

Two second hold until single flash will activate DayBright pulse pattern.

Three second hold until two flashes to turn light off.

If the light is left on when the bike is powered down it will turn on immediately when the bike is next turned on. NB If the light does not turn on, make sure the light function is active on the bike console.

OMS (OPTIMISED MODE SELECTOR)

OMS allows you to select a runtime tailored to your needs, the longer the runtime the lower the lumen output, if you double runtime, you halve lumen output.

The Flex has two programs to choose from:

Program HIGH (%) MEDIUM (%) LOW (%) FLASH PATTERN
1 100 (Reflex) - 25 (Reflex) DayBright
2 100 50 25 Regular

 

To select a program, start with the light off. Press and hold the function button, the light will emit a rapid set of flashes. The bicolour led and white led will then flash at slower, regular intervals.

For Program 1 - Release after first slow flash

For Program 2 - Release after second slow flash

The light will then remain in the selected Program, regardless of being turned off and on, until another Program is selected. Program 1 uses Reflex Technology to dim the light whilst stationary to save power usage.

MAINTENANCE

Inspect and test your light and bracket before every ride.

Keep your light clean and free of dirt, be careful when cleaning any mud or dirt from the lens to avoid scratching.

Never use a high pressure spray or hose on your light.

Do not use harsh, abrasive or corrosive materials to clean your light.

For more information click here

Set Title

Login